#!/bin/sh # This script will be called with the single argument of "boot" during the # system startup, to allow for unattended network configuration. # For this to work, all required information must be passed on the commandline. # Two parameters, 'kbd=' and 'nic=' must be used to supply this information. # kbd= # nic=::[:ipaddr:netmask[:gateway]] TMP=/var/log/setup/tmp if [ ! -d $TMP ]; then mkdir -p $TMP fi # Terminate the script now if we have an interface with an IP address: # Running the script is not needed anymore in that case. if `ip -f inet -o addr show | grep -v " lo " 1>/dev/null 2>/dev/null` ; then exit 0 fi # Function to convert the netmask from CIDR format to dot notation. cidr_cvt() { inform=$1 if [ $inform -ge 32 ]; then outform='255.255.255.255' elif [ $inform -ge 31 ]; then outform='255.255.255.254' elif [ $inform -ge 30 ]; then outform='255.255.255.252' elif [ $inform -ge 29 ]; then outform='255.255.255.248' elif [ $inform -ge 28 ]; then outform='255.255.255.240' elif [ $inform -ge 27 ]; then outform='255.255.255.224' elif [ $inform -ge 26 ]; then outform='255.255.255.192' elif [ $inform -ge 25 ]; then outform='255.255.255.128' elif [ $inform -ge 24 ]; then outform='255.255.255.0' elif [ $inform -ge 23 ]; then outform='255.255.254.0' elif [ $inform -ge 22 ]; then outform='255.255.252.0' elif [ $inform -ge 21 ]; then outform='255.255.248.0' elif [ $inform -ge 20 ]; then outform='255.255.240.0' elif [ $inform -ge 19 ]; then outform='255.255.224.0' elif [ $inform -ge 18 ]; then outform='255.255.192.0' elif [ $inform -ge 17 ]; then outform='255.255.128.0' elif [ $inform -ge 16 ]; then outform='255.255.0.0' elif [ $inform -ge 15 ]; then outform='255.254.0.0' elif [ $inform -ge 14 ]; then outform='255.252.0.0' elif [ $inform -ge 13 ]; then outform='255.248.0.0' elif [ $inform -ge 12 ]; then outform='255.240.0.0' elif [ $inform -ge 11 ]; then outform='255.224.0.0' elif [ $inform -ge 10 ]; then outform='255.192.0.0' elif [ $inform -ge 9 ]; then outform='255.128.0.0' elif [ $inform -ge 8 ]; then outform='255.0.0.0' elif [ $inform -ge 7 ]; then outform='254.0.0.0' elif [ $inform -ge 6 ]; then outform='252.0.0.0' elif [ $inform -ge 5 ]; then outform='248.0.0.0' elif [ $inform -ge 4 ]; then outform='240.0.0.0' elif [ $inform -ge 3 ]; then outform='224.0.0.0' elif [ $inform -ge 2 ]; then outform='192.0.0.0' elif [ $inform -ge 1 ]; then outform='128.0.0.0' elif [ $inform -ge 0 ]; then outform='0.0.0.0' fi echo $outform } # First, sane defaults: INTERFACE="" ENET_MODE="ask" # Does the commandline have NIC information for us? # Format is 'nic=driver:interface::ip:mask:gw' for CMDELEM in $(cat /proc/cmdline) ; do if $(echo $CMDELEM | grep -q "^nic=") ; then DRIVER=$(echo $CMDELEM | cut -f2 -d=) INTERFACE=$(echo $DRIVER | cut -f2 -d:) ENET_MODE=$(echo $DRIVER | cut -f3 -d:) if [ "$ENET_MODE" = "static" ]; then IPADDR=$(echo $DRIVER | cut -f4 -d:) NETMASK=$(echo $DRIVER | cut -f5 -d:) # We allow for CIDR notation of the netmask (0 < NETMASK < 25): if [ "$(echo $NETMASK | tr -cd '\.')" != "..." ]; then NETMASK=$(cidr_cvt $NETMASK) fi GATEWAY=$(echo $DRIVER | cut -f6 -d:) fi DRIVER=$(echo $DRIVER | cut -f1 -d:) break fi done # If the script has an argument of 'boot' then we require all information for # unattended network setup or else we silently exit. if [ "$1" = "boot" ]; then if [ "x$DRIVER" = "x" -o "x$INTERFACE" = "x" -o "$ENET_MODE" = "ask" ]; then exit 2 elif [ "$ENET_MODE" = "static" ] && [ "x$IPADDR" = "x" -o "x$NETMASK" = "x" ]; then exit 2 fi fi # If the cmdline provided the name of a driver, load it; # Alternatively check if the user ran "network" before running "setup"; # We need an interface: if [ `cat /proc/net/dev | grep ':' | sed -e "s/^ *//" | cut -f1 -d: | grep -v lo | wc -l` = 0 ]; then if [ "x${DRIVER}" != "x" ]; then modprobe ${DRIVER} 1>/dev/null 2>/dev/null else while [ 0 ]; do cat << EOF > $TMP/tempmsg You will now get a chance to probe your network interfaces. EOF dialog --title "PROBING NETWORK DEVICES" --msgbox "`cat $TMP/tempmsg`" 7 68 rm -f $TMP/tempmsg /bin/network --installer read -p "Press any key..." JUNK sleep 5 # Give dhcpcd a change to probe unset JUNK cat << EOF > $TMP/tempmsg Are you OK with the network interface which was detected? If not, select 'No' to get back to the network probe program. You can try to load another driver explicitly, by using "P ". If you are satisfied, select 'Yes' to continue with network configuration. EOF dialog --title "PROBING NETWORK DEVICES" --yesno "`cat $TMP/tempmsg`" 12 68 if [ $? = 0 ]; then rm -f $TMP/tempmsg break fi done fi fi # If we obtained information from a DHCP server, use it: if [ "x$INTERFACE" = "x" ]; then # the cmdline did not provide a nic for I_I in \ $(cat /proc/net/dev | grep ':' | sed -e "s/^ *//" | cut -f1 -d: | grep -v lo) ; do if [ -s /etc/dhcpc/dhcpcd-${I_I}.info ]; then INTERFACE="${I_I}" break fi done unset I_I fi while [ 0 ]; do T_PX="`cat $TMP/SeTT_PX`" UPNRUN=1 if [ "$T_PX" = "/" ]; then cat << EOF > $TMP/tempmsg You're running off the hard drive filesystem. Is this machine currently running on the network you plan to install from? If so, we won't try to reconfigure your ethernet card. Are you up-and-running on the network? EOF dialog --title "NETWORK CONFIGURATION" --yesno "`cat $TMP/tempmsg`" 12 68 UPNRUN=$? fi if [ $UPNRUN = 1 ]; then ENET_DEVICE=${INTERFACE:-"eth0"} if [ "x$INTERFACE" != "x" ]; then # interface specified via cmdline or dhcpcd if [ "$ENET_MODE" = "ask" ]; then # Offer to install using DHCP: cat << EOF > $TMP/tempmsg Do you want to configure your network interface '$ENET_DEVICE' automatically using DHCP? If you select 'No' you will be able to assign the IP address, netmask and gateway manually. EOF dialog --title "DHCP CONFIGURATION" --yesno "`cat $TMP/tempmsg`" 11 65 if [ $? -eq 0 ]; then rm -f $TMP/tempmsg echo $ENET_DEVICE > $TMP/SeTdhcp else rm -f $TMP/SeTdhcp fi elif [ "$ENET_MODE" = "dhcp" ]; then # Don't ask, just use DHCP echo $ENET_DEVICE > $TMP/SeTdhcp fi fi # End non-empty INTERFACE if [ ! -r $TMP/SeTdhcp ]; then # No DHCP configured, so use static IP. # If we have all the values ready, don't ask any. # Only if the script runs with the "boot" parameter will we silently accept # an empty gateway address (if we came this far, we will have IP/netmask): if [ "$1" = "boot" -a "x$GATEWAY" = "x" ]; then HAVE_GATEWAY=1 GATEWAY="unspec" else HAVE_GATEWAY=0 fi if [ "x$IPADDR" = "x" -o "x$NETMASK" = "x" -o "x$GATEWAY" = "x" ]; then cat << EOF > $TMP/tempmsg You need to enter the IP address you want to assign to this machine. Example: 192.168.2.101 What is your IP address? EOF if [ "$LOCAL_IPADDR" = "" ]; then # assign default LOCAL_IPADDR=${IPADDR} fi dialog --title "ASSIGN IP ADDRESS" --inputbox "`cat $TMP/tempmsg`" 14 \ 65 $LOCAL_IPADDR 2> $TMP/local if [ ! $? = 0 ]; then rm -f $TMP/tempmsg $TMP/local exit 1 fi LOCAL_IPADDR="`cat $TMP/local`" rm -f $TMP/local cat << EOF > $TMP/tempmsg Now we need to know your netmask. Typically this will be '255.255.255.0' but this can be different depending on your local setup. What is your netmask? EOF if [ "$LOCAL_NETMASK" = "" ]; then # assign default LOCAL_NETMASK=${NETMASK:-255.255.255.0} fi dialog --title "ASSIGN NETMASK" --inputbox "`cat $TMP/tempmsg`" 14 \ 65 $LOCAL_NETMASK 2> $TMP/mask if [ ! $? = 0 ]; then rm -f $TMP/tempmsg $TMP/mask continue fi LOCAL_NETMASK="`cat $TMP/mask`" rm $TMP/mask dialog --yesno "Do you have a gateway?" 5 30 HAVE_GATEWAY=$? if [ "$HAVE_GATEWAY" = "0" ]; then if [ "$LOCAL_GATEWAY" = "" ]; then if [ "$GATEWAY" = "" ]; then LOCAL_GATEWAY="`echo $LOCAL_IPADDR | cut -f1-3 -d '.'`." else LOCAL_GATEWAY=${GATEWAY} fi fi dialog --title "ASSIGN GATEWAY ADDRESS" --inputbox \ "\nWhat is the IP address for your gateway?" 9 65 \ $LOCAL_GATEWAY 2> $TMP/gw if [ ! $? = 0 ]; then rm -f $TMP/tempmsg $TMP/gw continue fi LOCAL_GATEWAY="`cat $TMP/gw`" rm -f $TMP/gw fi else # Non-interactive run, so we use the values set on the commandline: LOCAL_IPADDR=${IPADDR} LOCAL_NETMASK=${NETMASK} LOCAL_GATEWAY=${GATEWAY} fi # end questions asked fi # end static ip if [ "$ENET_MODE" = "ask" -a ! -r $TMP/SeTdhcp ]; then cat << EOF > $TMP/tempmsg This is the proposed network configuration for $ENET_DEVICE - If this is OK, then select 'Yes'. If this is not OK and you want to configure again, select 'No'. * IP Address: $LOCAL_IPADDR * Netmask: $LOCAL_NETMASK EOF if [ "$HAVE_GATEWAY" = 0 ]; then echo "* Gateway: $LOCAL_GATEWAY" >> $TMP/tempmsg fi echo "" >> $TMP/tempmsg dialog --no-collapse --title "NETWORK CONFIGURATION" --yesno "`cat $TMP/tempmsg`" 14 68 if [ $? -eq 1 ]; then continue # New round of questions fi fi # end ask approval for ip config #echo "Configuring ethernet card..." dialog --title "INITIALIZING NETWORK" --infobox \ "\nConfiguring your network interface $ENET_DEVICE ..." 5 56 if [ -r $TMP/SeTdhcp ]; then dhcpcd -k $ENET_DEVICE 1>/dev/null 2>&1 # Or else the '-T' will be used next: sleep 3 dhcpcd -L $ENET_DEVICE else dhcpcd -k $ENET_DEVICE 1>/dev/null 2>&1 # We don't need it now # Broadcast and network are derived from IP and netmask: LOCAL_BROADCAST=`ipmask $LOCAL_NETMASK $LOCAL_IPADDR | cut -f 1 -d ' '` LOCAL_NETWORK=`ipmask $LOCAL_NETMASK $LOCAL_IPADDR | cut -f 2 -d ' '` ifconfig $ENET_DEVICE $LOCAL_IPADDR netmask $LOCAL_NETMASK broadcast $LOCAL_BROADCAST if [ "$HAVE_GATEWAY" = "0" ]; then #echo "Configuring your gateway..." route add default gw $LOCAL_GATEWAY metric 1 fi echo $LOCAL_IPADDR > $TMP/SeTIP echo $LOCAL_NETMASK > $TMP/SeTnetmask echo $LOCAL_GATEWAY > $TMP/SeTgateway fi fi # ! UPNRUN break done echo $UPNRUN > $TMP/SeTupnrun # Basic initialisation completed. Let's see what the commandline has for us: # If we know of a remote configuration file, get it now: # Provide comma-separated values (protocol,remoteserver[:portnumber],configfile) # like this example: 'cf=tftp,192.168.0.22,/slackware-12.1/configs/t43.cfg' for CMDELEM in $(cat /proc/cmdline) ; do if $(echo $CMDELEM | grep -q "^cf=") ; then CONFIGFILE=$(echo $CMDELEM | cut -f2 -d=) PROTO=$(echo $CONFIGFILE | cut -f1 -d,) DLSERVER=$(echo $CONFIGFILE | cut -f2 -d,) CONFIGFILE=$(echo $CONFIGFILE | cut -f3 -d,) dialog --title "FETCHING CONFIG FILE" --infobox \ "\nAttempting to fetch a remote configuration file using $PROTO..." 5 70 fi done if [ -n "$CONFIGFILE" ]; then if [ "$PROTO" = "tftp" ]; then tftp -g -r $CONFIGFILE -l $TMP/Punattended $DLSERVER 1>/dev/null 2>&1 elif [ "$PROTO" = "ftp" -o "$PROTO" = "http" ]; then wget -q -P $TMP -O Punattended ${PROTO}://${DLSERVER}${CONFIGFILE} fi fi